One-Handed Ratchet Tool with Cutter
Item #
Y3533

One-Handed Ratchet Tool with Cutter

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$296.00

0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 855‑444‑9465 or email us.

Product Information

Details

One-Handed Ratchet Tool with Cutter

The one-handed ratchet tool for stainless steel strapping provides a quick and easy way to install banding around poles and pipes. Use with ¼″ to ¾″ wide strapping.

  • Y3533 one-handed ratchet tool
  • One-handed ratchet tool tightening strapping to pipe

Installation

  1. Measure out enough stainless-steel strapping to go around the pole including an extra 12″ or so of slack.
  2. Insert one end of the strapping into your straight leg sign mounting bracket.
  3. Insert the same end into your buckle or wing seal and bend about 2″ to 3″ of strapping underneath the wing seal or buckle.
  4. Wrap the strapping around the pole and slide the other end of the strapping through the buckle or wing seal and bend it back so that the strapping stays in place.
  5. Tighten the strapping down with the strapping tool, making sure that the tool is against the wing seal or buckle during this step.
  6. Once the strapping is tight, bend the strapping with the tool to hold the tension and use the cutter to cut off the excess strapping.
  7. Fold the excess strapping over the buckle or wing seal and hammer down the wings to secure the strapping.
  8. Repeat these steps to install the second band of strapping.
  • Strapping being inserted into the buckle
    Strapping being inserted into the buckle
  • Strapping being inserted into wing seal
    Strapping being inserted into wing seal
  • The other end of the strapping being inserted and bent to hold it in place
    The other end of the strapping being inserted
    and bent to hold it in place
  • Strapping tool Y3533 tightening the strapping around the pole
    Strapping tool Y3533 tightening and then cutting
    the strapping around the pole
  • Using either the Spinner or Ratchet tool cut the excess strapping
    Using the Ratchet tool cut the excess strapping
  • Bend the strapping over the buckle or wing seal to partially secure the strapping
    Bend the strapping over the buckle or wing
    seal to partially secure the strapping

Reviews

855‑444‑9465
Cart

Your cart is empty.